談?wù)摴に嚬艿?
403 The design of the process piping is performed directly on a model of the project.
工藝配管的設計是直接按照工程項目的一個模型完成的。
404 The model is an actual working tool for piping.
模型是配管用的實際工具。
405 Piping erection work include: prefabrication, placing, aligning, welding and bolting.
管道安裝工作包括：預制加工、安置、對準、焊接和連接。
406 Our piping prefabrication workshop covers a total area of 1000m2.
我們的管道預制加工廠擁有一千平方米的面積。
407 We can perform the pipe by following operations: cutting and mechanical chamfering, manual and automatic welding.
我們可以對管子進行下列預制加工：切割和機械加工坡口,手工和自動焊接等。
408 The computer generates isometric drawings and prints out bill of materials.
計算機繪出管道空視圖,并打印出材料明細表。
409 We shall complete the manhour requirements for the site fabrication (site erection ) of this drawing.
我們將制訂這張圖紙現場制作(現場安裝)所需的工時條件。
410 Seamless steel tube is made in sizes for 1/8 to 24 inches.
無縫鋼管制作的尺寸從八分之一寸到二十四寸。
411 Spiral-welded steel pipe is available in sizes from 6 to 36 inches.
螺旋焊接鋼管的尺寸從六寸到三十六寸。
412 Two types of end are standard on steel pipes and fittings, that is flanged and screwed.
鋼管和管件有兩種標準端部型式,即：法蘭和絲扣。
413 This pipe is made of carbon steel (stainless steel ,cast iron, plastic).
這管子是碳素鋼(不銹鋼、鑄鐵、塑料)制成的。
414 We usually use elbow (bend, flange, tee, reducer) as a kind of pipe fitting.
我們常用彎頭(彎管、法蘭、三通、大小關)作為一種管件。
415 What is the installation elevation of this pipeline?
這條管線的安裝標高是多少?
416 This pipeline will be installed on the No.8 pipe rack.
這條管線將安裝于八號管廊架上。
417 The transfer medium in this pipeline is liquid ammonia (process air, soft water, alkali liquor, acidic gas).
這條管線的輸送介質為液氨(工藝空氣、軟水、堿液、酸性氣體)。
418 This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
這是一個閘閥(止回閥、蝶閥、切斷閥、電磁閥、遙控閥、安全閥、節流閥、旋塞)。
419 Please explain the method of field test and flushing (blowing off )of the pipelines.
請說明管線的現場試驗和沖洗(吹凈)方法。
420 We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
我們將為奧氏體不銹鋼管的水壓試驗引進凈水。
421 We need a piping material list (list of piping support, bill of welding rod).
我們需要一份配管材料表(管架一覽表、焊條明細表)。
422 The welding (heat treatment) of pipes have been carried out with incorporated programming.
管子的焊接(熱處理)現已按照編寫的程序完成。
423 We can carry out various treatment for the inner surface of pipes, such as sanding, chemical pickling, purging and passivation.
我們可以進行管子內壁的各種處理,諸如：噴砂、化學酸洗、沖洗和鈍化。
424 The outer surface of this pipeline will be painted in green (red, yellow, blue, white, black, grey, brown) color.
這條管線的外表面將涂刷綠(紅、黃、藍、白、黑、灰、棕)色。
403 The design of the process piping is performed directly on a model of the project.
工藝配管的設計是直接按照工程項目的一個模型完成的。
404 The model is an actual working tool for piping.
模型是配管用的實際工具。
405 Piping erection work include: prefabrication, placing, aligning, welding and bolting.
管道安裝工作包括：預制加工、安置、對準、焊接和連接。
406 Our piping prefabrication workshop covers a total area of 1000m2.
我們的管道預制加工廠擁有一千平方米的面積。
407 We can perform the pipe by following operations: cutting and mechanical chamfering, manual and automatic welding.
我們可以對管子進行下列預制加工：切割和機械加工坡口,手工和自動焊接等。
408 The computer generates isometric drawings and prints out bill of materials.
計算機繪出管道空視圖,并打印出材料明細表。
409 We shall complete the manhour requirements for the site fabrication (site erection ) of this drawing.
我們將制訂這張圖紙現場制作(現場安裝)所需的工時條件。
410 Seamless steel tube is made in sizes for 1/8 to 24 inches.
無縫鋼管制作的尺寸從八分之一寸到二十四寸。
411 Spiral-welded steel pipe is available in sizes from 6 to 36 inches.
螺旋焊接鋼管的尺寸從六寸到三十六寸。
412 Two types of end are standard on steel pipes and fittings, that is flanged and screwed.
鋼管和管件有兩種標準端部型式,即：法蘭和絲扣。
413 This pipe is made of carbon steel (stainless steel ,cast iron, plastic).
這管子是碳素鋼(不銹鋼、鑄鐵、塑料)制成的。
414 We usually use elbow (bend, flange, tee, reducer) as a kind of pipe fitting.
我們常用彎頭(彎管、法蘭、三通、大小關)作為一種管件。
415 What is the installation elevation of this pipeline?
這條管線的安裝標高是多少?
416 This pipeline will be installed on the No.8 pipe rack.
這條管線將安裝于八號管廊架上。
417 The transfer medium in this pipeline is liquid ammonia (process air, soft water, alkali liquor, acidic gas).
這條管線的輸送介質為液氨(工藝空氣、軟水、堿液、酸性氣體)。
418 This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
這是一個閘閥(止回閥、蝶閥、切斷閥、電磁閥、遙控閥、安全閥、節流閥、旋塞)。
419 Please explain the method of field test and flushing (blowing off )of the pipelines.
請說明管線的現場試驗和沖洗(吹凈)方法。
420 We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
我們將為奧氏體不銹鋼管的水壓試驗引進凈水。
421 We need a piping material list (list of piping support, bill of welding rod).
我們需要一份配管材料表(管架一覽表、焊條明細表)。
422 The welding (heat treatment) of pipes have been carried out with incorporated programming.
管子的焊接(熱處理)現已按照編寫的程序完成。
423 We can carry out various treatment for the inner surface of pipes, such as sanding, chemical pickling, purging and passivation.
我們可以進行管子內壁的各種處理,諸如：噴砂、化學酸洗、沖洗和鈍化。
424 The outer surface of this pipeline will be painted in green (red, yellow, blue, white, black, grey, brown) color.
這條管線的外表面將涂刷綠(紅、黃、藍、白、黑、灰、棕)色。
